Rough openings are essential when it comes to installing interior doors. A rough opening is the space between the framework of the doorway and the finished wall. It is important to get the size of the rough opening right in order to ensure that the door will fit properly when it is installed.
Measuring the Rough Opening
The rough opening must be larger than the actual door size. To measure the rough opening, you need to measure the width of the doorway from the inside surface of the side jambs. You should also measure the height from the top jamb to the floor. These measurements will determine the size of the rough opening.
Preparing the Rough Opening
Before you can install the door, you must prepare the rough opening. This includes removing any existing trim and casing from the doorway. You may also need to remove any baseboard or drywall that is in the way. Once the rough opening is clear, you will need to make sure that it is square and level. If it is not, you may need to adjust the side jambs and the top jamb to make it so.
Installing the Door
Once the rough opening is prepared, you can begin to install the door. Start by placing the door in the rough opening and make sure it is level and plumb. Then, use shims and a level to make sure the door is properly aligned. Next, secure the door to the frame with screws. Finally, you can caulk and add trim to the door frame to complete the installation.
Conclusion
Rough openings are an important part of installing interior doors. A rough opening must be larger than the actual door size to ensure a proper fit. When preparing the rough opening, make sure it is square and level. Then, secure the door with screws and add trim to complete the installation.
