Choosing the right size of a rough opening for an interior door is an important decision for any homeowner. The rough opening refers to the space in the wall that the door will occupy. The size of the opening should be large enough to accommodate the door, but not so large that it compromises the structural integrity of the wall. Knowing the rough opening size for a 32-inch interior door is the first step when installing a new door.
Factors to Consider When Measuring Rough Opening
When measuring the rough opening for a 32-inch interior door, it’s important to consider a few factors. Firstly, you need to be aware of the width of the door and the type of doorjamb. You should also account for the size of the trim and any other materials needed for the door installation. The rough opening should be slightly larger than the door and doorjamb combined, to allow for easy installation.
Standard Rough Opening Sizes for 32 Inch Interior Doors
The standard rough opening size for a 32-inch interior door is 37 inches wide by 81 inches high. This size is suitable for a single prehung door with a 2-inch jamb. The size of the jamb will vary depending on the type of door and the manufacturer. You may need to adjust the rough opening size to accommodate different jamb widths.
Tips for Measuring and Framing the Rough Opening
When measuring and framing the rough opening, it’s important to use a level and a measuring tape. You should also use a stud finder to locate the studs in the wall, as they will be used to support the door frame. Once the rough opening is framed, it should be filled with shims and insulation before the door is installed.
Conclusion
Installing an interior door requires careful planning and accurate measurements. Knowing the size of the rough opening for a 32-inch interior door is the first step when installing a new door. The standard rough opening size for a 32-inch interior door is 37 inches wide by 81 inches high. When framing the rough opening, it’s important to use a level and a measuring tape, and to locate the studs in the wall. Once the rough opening is framed, it should be filled with shims and insulation before the door is installed.
