How To Replace An Interior Door Threshold

Replacing the interior door threshold is a relatively simple task that can be completed with some basic tools and supplies. Here are the steps on how to replace an interior door threshold:

Materials That You'll Need

Before you start, you will need to gather the following materials:

New door threshold
Pry bar or flathead screwdriver
Hammer or nail gun
Tape measure or ruler
Pencil or utility knife
Caulk gun and caulk

Safety Precautions

Be sure to take the following safety precautions before beginning:

Wear safety glasses
Use caution when using sharp tools
Make sure the work area is well-ventilated

Step-by-Step Instructions

Here are the step-by-step instructions on how to replace an interior door threshold:

1. Remove the Old Threshold

Use a pry bar or flathead screwdriver to carefully pry up the old threshold. Be careful not to damage the flooring or the door frame.

2. Measure and Cut the New Threshold

Measure the width of the door frame and cut the new threshold to the same length.

3. Install the New Threshold

Position the new threshold in the door frame and tap it into place with a hammer or nail gun.

4. Caulk the Threshold

Apply a bead of caulk around the perimeter of the threshold to seal it and prevent drafts.

5. Clean Up

Clean up any debris and dispose of the old threshold.

Tips

Here are a few tips for replacing an interior door threshold:

Use a threshold that is the same thickness as the flooring.
If the new threshold is too long, you can cut it down with a saw.
Make sure to caulk the threshold to prevent drafts.

Conclusion

Replacing an interior door threshold is a relatively simple task that can be completed in a few hours. By following these steps, you can easily replace the threshold and improve the look and feel of your home.