How To Replace A 6 Panel Interior Door

How to Replace a 6-Panel Interior Door in 10 Easy Steps

Replacing an interior door is a relatively straightforward project that can be completed in a few hours. With the right tools and materials, you can easily replace an old or damaged door with a new one. ### Tools and Materials * New 6-panel interior door * Door jamb * Door hinges * Door knob and lockset * Screwdriver * Drill * Level * Tape measure * Safety glasses * Gloves ### Step 1: Remove the Old Door 1. Put on your safety glasses and gloves. 2. Open the door and remove the hinges with a screwdriver. 3. Carefully lift the door off the jamb and set it aside. ### Step 2: Prepare the Door Jamb 1. Inspect the door jamb for any damage. If the jamb is damaged, you will need to replace it before installing the new door. 2. If the jamb is in good condition, sand it lightly to smooth any rough edges. ### Step 3: Install the Door Hinges 1. Position the new door in the door jamb. 2. Mark the location of the hinges on the door jamb. 3. Drill holes for the hinges. 4. Insert the hinges into the holes and secure them with screws. ### Step 4: Install the Door Knob and Lockset 1. Measure the thickness of the door. 2. Mark the location of the door knob and lockset on the door. 3. Drill holes for the door knob and lockset. 4. Insert the door knob and lockset into the holes and secure them with screws. ### Step 5: Hang the Door 1. Lift the door and position it in the door jamb. 2. Make sure the door is level and centered in the jamb. 3. Secure the door to the jamb with screws. ### Step 6: Test the Door 1. Close the door and make sure it opens and closes smoothly. 2. Check the door for any gaps or drafts. 3. If there are any gaps, adjust the hinges or door jamb until the gaps are eliminated. ### Step 7: Trim the Door 1. If the door is too long, you will need to trim it to fit the jamb. 2. Measure the length of the door jamb. 3. Mark the door at the desired length. 4. Use a saw to cut the door to the desired length. ### Step 8: Paint or Stain the Door 1. If you want to paint or stain the door, do so now. 2. Allow the paint or stain to dry completely before proceeding. ### Step 9: Install the Trim 1. Measure and cut the trim to fit the door. 2. Nail or glue the trim to the door jamb. ### Step 10: Clean Up 1. Clean up the work area and remove any debris. 2. Enjoy your new interior door!