How To Remove Interior Door Handle With Lock

Knowing how to remove an interior door handle with a lock is a useful skill for any homeowner. This task is not as complicated as it may seem, and it can be done with just a few simple tools. In this guide, we will provide step-by-step instructions on how to remove an interior door handle with a lock, so you can easily replace it with a new one if needed.

Tools You'll Need

Before you start, you will need to gather a few tools:

Phillips head screwdriver
Flathead screwdriver
Allen wrench (if applicable)

Step-by-Step Instructions

1. Remove the Faceplate

Start by removing the faceplate, which is the decorative cover that surrounds the doorknob or lever. Use a Phillips head screwdriver to remove the screws that hold the faceplate in place.

2. Remove the Handle

Once the faceplate is removed, you will see the handle assembly. Use a flathead screwdriver to press the latch release button, which will allow you to remove the handle.

3. Remove the Lock Cylinder

If the door has a lock, you will need to remove the lock cylinder. Insert the Allen wrench into the set screw on the side of the lock cylinder and turn it counterclockwise to loosen the screw. Pull the lock cylinder out of the door.

4. Remove the Handle Assembly

With the lock cylinder removed, you can now remove the handle assembly. Use a Phillips head screwdriver to remove the screws that hold the handle assembly in place. Pull the handle assembly out of the door.

5. Reinstall the New Handle

Once you have removed the old handle, you can now install the new one. Insert the new handle assembly into the door and secure it with the screws. Reinstall the lock cylinder and tighten the set screw. Finally, attach the faceplate and secure it with the screws.

Congratulations! You have successfully removed and replaced an interior door handle with a lock.

Tips

Here are a few tips to make the process easier:

If the handle is stuck, you can use a penetrating oil to loosen it up.
Be careful not to strip the screws when removing them.
If you are replacing the handle with a different type of handle, make sure that you have the correct screws.

Conclusion

Removing an interior door handle with a lock is a simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can easily replace a broken or damaged handle with a new one.