How To Remove Interior Door Casing

Removing interior door casing is a simple task that can be completed with a few basic tools. By following these steps, you can easily remove the casing without damaging the door or the walls.

Tools and Materials:

Flat pry bar
Hammer
Putty knife
Utility knife
Safety glasses

Safety Precautions:

Before you begin, it is important to take some safety precautions. Wear safety glasses to protect your eyes from flying debris. Be careful when using sharp tools, and always work in a well-ventilated area.

Steps:

Remove the doorstop. The doorstop is typically held in place by a few nails. Use a flat pry bar to gently pry the doorstop away from the jamb.
Score the caulk. Use a utility knife to score the caulk around the casing. This will help to break the seal and make the casing easier to remove.
Pry off the casing. Use a flat pry bar to gently pry the casing away from the jamb. Start at one corner and work your way around the entire casing.
Remove the nails. Once the casing is loose, use a hammer and nail set to remove the nails that are holding it in place.
Clean up. Once the casing is removed, use a putty knife to clean up any remaining caulk or debris.

Tips:

If the casing is particularly stubborn, you may need to use a hammer and chisel to break it loose.
Be careful not to damage the door or the walls when removing the casing.
If you are not comfortable removing the casing yourself, you can hire a professional to do it for you.

Conclusion:

Removing interior door casing is a simple task that can be completed in a few minutes. By following these steps, you can easily remove the casing without damaging the door or the walls.