How To Remove An Old Interior Door Knob

How to Effortlessly Remove an Old Interior Door Knob

Replacing an old or damaged interior door knob can be a simple and rewarding home improvement task. Whether you're updating the aesthetics of your home or fixing a malfunctioning knob, this guide will walk you through the necessary steps to remove an old interior door knob efficiently. ### Tools and Materials Before you begin, make sure you have the following tools and materials on hand: - Screwdriver (Phillips or flathead, depending on the type of screws) - Allen wrench (if the door knob has a set screw) - Hammer (optional) - Pry bar (optional) - New interior door knob and latch assembly (if replacing the knob) ### Instructions: 1.

Safety First

: If you're replacing the door knob with a new one, remove the door from its hinges to make the process easier and safer. Alternatively, if you're only removing the door knob, ensure that the door is closed and can't accidentally open during the process. 2.

Locate the Set Screw

: Look for a small set screw on the face of the door knob. This screw is usually located near the base of the knob, either on the side or underneath. 3.

Remove the Set Screw

: Using the appropriate Allen wrench, turn the set screw counterclockwise to loosen and remove it completely. If there is no set screw, proceed to the next step. 4.

Remove the Escutcheon Plates

: Locate the escutcheon plates, also known as the trim plates, on both sides of the door. These plates are usually held in place by screws. Use the screwdriver to remove the screws and detach the escutcheon plates. 5.

Loosen the Door Knob

: With the escutcheon plates removed, you can now loosen the door knob. Grasp the knob firmly and turn it counterclockwise to loosen it. In some cases, you may need to tap the knob gently with a hammer to loosen it. 6.

Separate the Door Knob Halves

: Once the door knob is loose, separate the two halves by pulling them apart. Be careful not to lose any of the internal components, such as the latch or springs. 7.

Remove the Latch Assembly

: Locate the latch assembly, which is the metal mechanism that extends and retracts when the door is opened or closed. Use the screwdriver to remove the screws securing the latch assembly to the door. Once the screws are removed, carefully remove the latch assembly from the door. 8.

Install the New Door Knob

: If you're replacing the door knob, follow the manufacturer's instructions to install the new knob and latch assembly. Make sure to align the latch assembly properly with the strike plate on the door frame. 9.

Reattach the Escutcheon Plates

: Once the new door knob is installed, reattach the escutcheon plates on both sides of the door using the screws you removed earlier. Ensure the plates are properly aligned and flush with the door surface. 10.

Test the New Door Knob

: With the new door knob installed, test it by opening and closing the door to ensure it operates smoothly and securely. By following these steps, you can successfully remove an old interior door knob and replace it with a new one, giving your home a fresh and updated look.