How To Install An Interior Door Handle

How to Install an Interior Door Handle

Installing an interior door handle is a relatively simple task that can be completed in a few minutes with the right tools and materials. Here are the steps on how to install an interior door handle: ###

Tools and Materials:

- New interior door handle - Phillips-head screwdriver - Flat-head screwdriver - Tape measure - Pencil - Level - Drill - Safety glasses ###

Instructions:

Remove the Old Doorknob:

- Use a flat-head screwdriver to remove the two screws that hold the faceplate of the old doorknob in place. - Once the faceplate is removed, you will see the latch mechanism. - Remove the two screws that hold the latch mechanism in place and pull it out of the door. 2.

Measure and Mark the Door:

- Use a tape measure to measure the distance from the center of the doorknob hole to the top of the door. - Mark this measurement on the door with a pencil. - Next, measure the distance from the center of the doorknob hole to the edge of the door. - Mark this measurement on the door with a pencil. 3.

Install the Latch Mechanism:

- Align the latch mechanism with the marks you made on the door. - Secure the latch mechanism in place with the two screws that you removed earlier. 4.

Install the Faceplate:

- Align the faceplate with the latch mechanism. - Secure the faceplate in place with the two screws that you removed earlier. 5.

Test the Door Handle:

- Open and close the door to make sure that the door handle works properly. - If the door handle is not working properly, check to make sure that the latch mechanism is installed correctly. 6.

Install the Strike Plate:

- Use a level to mark the location of the strike plate on the door jamb. - Drill a hole in the door jamb at the marked location. - Install the strike plate in the hole and secure it with the screws that came with the strike plate. 7.

Test the Door Handle Again:

- Open and close the door to make sure that the door handle works properly. - If the door handle is working properly, you are finished installing the interior door handle. ###

Additional Tips:

- If you are installing a new door handle on a door that has an existing hole for the door handle, you may need to enlarge the hole. - Be careful not to overtighten the screws when installing the door handle. - If you are not comfortable installing an interior door handle, you can always hire a professional to do it for you. ###

Conclusion:

Installing an interior door handle is a relatively simple task that can be completed in a few minutes with the right tools and materials. By following the steps outlined above, you can easily install an interior door handle in your home.