How To Install A Prehung Interior Door Home Depot

Installing a prehung interior door from Home Depot is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can ensure a professional-looking installation.

Materials You'll Need:

Prehung interior door
Level
Tape measure
Pencil
Utility knife
Screwdriver
Hammer
Nail set
Wood filler (optional)
Paint or stain (optional)

Step 1: Prepare the Doorway

Before you begin installing the door, it is important to prepare the doorway. This includes removing any old trim or doorstop, as well as checking to make sure the door frame is level and plumb.

Step 2: Position the Door

Once the doorway is prepared, you can position the door. Place the door in the opening and make sure it is level and plumb. Use shims to level the door if necessary.

Step 3: Secure the Door

Once the door is positioned, you can secure it. Start by driving screws into the hinges. Then, drive nails into the sides of the door frame, spacing them about 12 inches apart.

Step 4: Install the Trim

Once the door is secure, you can install the trim. Cut the trim to fit around the door frame and secure it with nails. You can also add a doorstop to prevent the door from swinging too far open.

Step 5: Finish the Door

Once the trim is installed, you can finish the door by painting or staining it. You can also add hardware, such as handles and knobs.

Tips:

If you are not comfortable installing a door yourself, you can hire a professional to do it for you.
Be sure to measure the doorway before you purchase a door to ensure a proper fit.
Use a level to make sure the door is installed correctly.
Take your time and do the job right. Installing a door properly will ensure that it functions smoothly for years to come.