How To Fix Interior Car Door Handle Ford Fusion

How to Fix Interior Car Door Handle Ford Fusion

The Ford Fusion is a popular mid-size sedan known for its reliability and comfort. However, like any vehicle, it can experience issues over time, including problems with the interior car door handles. These handles are crucial for accessing the vehicle and can malfunction for a variety of reasons. If you're experiencing problems with your Ford Fusion's interior door handle, this guide will provide you with the necessary information to diagnose and fix the issue.

1. Identify the Problem

The first step to fixing a faulty interior car door handle is determining the exact nature of the problem. Common issues include:

Loose or broken handle: This is often caused by wear and tear, especially if the handle is frequently used. The handle may feel loose or may detach completely.
Sticking handle: The handle may get stuck in the open or closed position due to dirt, debris, or a broken spring mechanism.
Non-functional handle: This is usually a sign of a broken cable or linkage that connects the handle to the latch mechanism.

Once you've identified the issue, you can proceed to the appropriate repair steps.

2. Fix a Loose or Broken Handle

If the handle is loose or broken, you'll need to replace it. This can be done with relative ease, even for those with limited mechanical experience. Here are the steps involved:

Remove the door panel: Begin by removing the door panel to access the handle mechanism. This is usually accomplished by unscrewing a few screws around the panel and carefully prying it off. Refer to your Ford Fusion's owner's manual for specific instructions.
Remove the old handle: Once the door panel is removed, you'll see the handle attached to the door. Disconnect the handle from the linkage and remove any screws or clips holding it in place.
Install the new handle: Attach the new handle to the door using the screws or clips that came with it. Connect the handle to the linkage and ensure it's securely fastened.
Reinstall the door panel: Reattach the door panel and secure it with the screws you removed earlier.

Always purchase a replacement handle that's specific to your Ford Fusion model year. It's also a good idea to use a torque wrench to tighten the screws to the correct specifications.

3. Fix a Sticking Handle

If the handle is sticking, it's likely that dirt or debris has accumulated in the mechanism. You can try cleaning it with a small brush and compressed air. If that doesn't work, you may need to disassemble the handle and clean it more thoroughly. Here are the steps involved:

Remove the door panel: Follow the same steps as above to remove the door panel and access the handle mechanism.
Disassemble the handle: Carefully disassemble the handle, removing any screws or clips holding it together.
Clean the mechanism: Use a small brush and compressed air to remove any dirt, debris, or rust from the handle mechanism.
Lubricate the mechanism: Apply a small amount of lubricant, such as white lithium grease, to the moving parts of the mechanism. This will help to prevent future sticking.
Reassemble the handle: Reassemble the handle, ensuring all parts are properly aligned and secured.
Reinstall the door panel: Reattach the door panel and secure it with the screws you removed earlier.

If the handle continues to stick after cleaning and lubrication, it may be a sign of a broken spring or other internal component. In this case, you'll need to replace the handle.