How To Install Interior Door Handle With Lock

How to Install an Interior Door Handle with Lock

Installing an interior door handle with a lock is a relatively simple project that can be completed in a few hours. However, it is important to ensure that the door is properly prepared before installing the handle and lock. This will help to ensure that the handle and lock work properly and that the door is secure.

Materials Needed

Interior door handle with lock
Screwdriver
Drill
1/8-inch drill bit
Chisel
Hammer

Step-by-Step Instructions

1. Prepare the Door

The first step is to prepare the door for the handle and lock. This involves drilling a hole for the handle and mortising the door for the lock. To drill the hole for the handle, measure 3 inches from the top of the door and 2-3/8 inches from the edge of the door. Mark this spot with a pencil and drill a 1/8-inch hole. To mortise the door for the lock, measure 1 inch from the edge of the door and 2-3/8 inches from the top of the door. Mark this spot with a pencil and chisel out a 1-inch by 2-3/8-inch slot.

2. Install the Handle

Once the door is prepared, you can install the handle. To do this, insert the handle into the hole from the outside of the door and secure it with the screws. Make sure that the screws are tightened securely.

3. Install the Lock

To install the lock, insert the lock into the slot in the door and secure it with the screws. Make sure that the screws are tightened securely. Once the lock is installed, you can test it by turning the key and locking and unlocking the door.

4. Install the Strike Plate

The final step is to install the strike plate. To do this, hold the strike plate against the door frame and mark the holes for the screws. Drill the holes and insert the screws to secure the strike plate.

Tips

Before you begin, be sure to read the instructions that come with the handle and lock. This will help you to ensure that you are installing the hardware correctly.
If you are not comfortable installing the handle and lock yourself, you can hire a professional to do it for you.
Be sure to test the handle and lock after you have installed them to make sure that they are working properly.