How To Install Interior Split Jamb Door

How to Install an Interior Split Jamb Door

Installing an interior split jamb door can be a relatively simple and straightforward process that can be completed in a few hours. However, it is important to take the necessary time to ensure that the door is installed correctly and will function properly.

Materials Needed:

Split jamb door
Door frame
Shims
Nails or screws
Hammer or drill
Level
Tape measure

Steps:

Inspect the door and frame: Before starting the installation, inspect the door and frame for any damage. If any damage is found, it should be repaired before continuing.
Position the door frame: Place the door frame in the opening and align it with the studs. Use a level to ensure that the frame is plumb and level. Secure the frame to the studs using nails or screws.
Install the split jambs: Insert the split jambs into the frame and secure them using nails or screws. Make sure that the jambs are flush with the frame and that they are square.
Fit the door: Lift the door into the frame and align it with the jambs. Use shims to adjust the height and width of the door as needed.
Hang the door: Once the door is properly aligned, hang it on the hinges. Check the operation of the door to ensure that it opens and closes smoothly.
Trim the door: If necessary, trim the bottom of the door to fit the floor. You can use a saw or a hand plane to do this.
Caulk and paint: Once the door is installed, caulk the gaps around the frame and trim. You can also paint the door and trim to match the surrounding décor.

Tips:

When measuring the door opening, make sure to measure the width, height, and thickness of the opening.
Use a level to ensure that the door frame is plumb and level before securing it to the studs.
Use shims to adjust the height and width of the door as needed.
Check the operation of the door before trimming it to fit the floor.

Installing an interior split jamb door is not a difficult task, but it is important to take the necessary time to ensure that the door is installed correctly. By following these steps and tips, you can ensure that your new door will function properly for years to come.